Holographic stickers are fantastic and so sweet to apply. It glitters, sparkles, and reflects one hue or another based on the angle of incidence of light. That’s why these stickers are great to put on notebooks, water bottles, laptops, and phones, and, of course, if you want to gift something with your design – go ahead!
You can use them to add a little spice and chic to just about any item! But, if you’ve ever tried to apply one, you might have noticed something tricky: blemishes such as bubbles and wrinkles may appear, making your sticker look less professional.
Don’t worry! Surprisingly, once you know how to apply your holographic stickers, you will not end up with bubbles or wrinkles on the surfaces. In this article, Let me walk you through how to apply these holographic stickers and make them look perfect, with no sign of being out of shape or finished with a luster. Praise these directions, and you will eventually become conscientious about applying stickers!
Why Do Bubbles and Wrinkles occur?
However, to understand how one can avoid getting bubbles or wrinkles in the first place, it is important to understand why this happens. If you apply a sticker over it, the air can STICK under the surface, forming bubbles. Those bubbles appear because the surface is not flat or the sticker is not applied firmly and uniformly.
Lines occur when the sticker is not placed flat on the chosen substrate. If you stretch the sticker too hard or do not cover it properly, it is easily prone to creases or folds. Lines and sexes can be fatal for the holographic sticker, so they should be applied perfectly to achieve that desirable smooth surface.
Step 1: Clean the Area on Which You Intend to Stick the Sticker
The first thing you need to do to avoid bubbles or wrinkles on your holographic sticker is to see that the area where you intend to place it is clean. If the surface where your sticker will be placed is dirty, dusty, or greasy, it will not adhere properly, and bubbles may appear. Also, due to dirt and oils, the sticker wears out and even peels off from the surface.
Cleaning the surface requires using a soft cloth or paper towel and mild soap and water. First, use a piece of tissue or soft cloth often used to clean any necessary debris: dust, fingerprints, or grease. If the surface is very sticky or greasy, use some rubbing alcohol on a cotton pad and wipe it over the surface.
It is important to avoid touching the surface on which you want to stick your holographic sticker until it dries. This avoids installing wrinkles on the sticker and makes the surface sticky so that the sticker can easily stick to the surface.
Step 2: Peel the Sticker Carefully
After the surface is cleaned and dried, it is ready to remove your holographic sticker’s backing. Try to be as smooth as possible when peeling the sticker because that may make the sticker fold, bend, or tear.
Begin by removing the corner using your fingernails and carefully inserting a plastic card to do this. Begin to take off the backing carefully because if your fingers touch the sticky side, they can leave marks that prevent the sticker from adhering correctly.
The way is to start peeling the backing slowly. The sticker must be smooth and not pinched while peeling the backing. Spend time during this step; this will greatly determine your outcome when applying the sticker to the intended surface.
Step 3: Align the Sticker Properly
If your sticker design is complete, it’s time to figure out where you will start sticking it. Once you place the sticker onto the surface correctly, arranging it becomes a bit hard; otherwise, bubbles and wrinkles will form on the surface.
To position the sticker, pick it by the corners and position it above the area of the object you want to sticker. Make sure it’s in the correct position before it is pressed down.
This is especially useful if the sticker is going on a larger surface such as a laptop or notebook – because, as I found out, gently folding the sticker in half without removing the entirety of the backing can help you align and distribute the sticker properly. That way, you will be in an excellent position to apply pressure until you are content gently.
Step 4: As stated earlier, spread the sticker gently and slowly.
This is the most important part: gluing the sticker gradually, sticking and shining it. Take your time at this stage because excessive pressure or haste is likely to form air bubbles under the clay linings. How do I remove a sticker? Begin pulling the sticker at one end and go to the other end.
You press down while gliding your fingers or any flat object, such as a credit card, over the sticker. It can start at the corner of the car and work your way down to the opposite corner or up from the floor to the vehicle’s roof, with the sticker continuously sticking to the car’s body.
Rub softly and apply a bit of pressure while ensuring that one is trying to push out air from beneath the sticker. If you start from the center and work outwards, you encourage any trapped air to be pushed outwards, significantly minimizing the chances of bubbles forming.
This is just a normal price bubble, and if you happen to find yourself in the middle of it, don’t sweat it. Just take it very gently at the point where the bubble is and press it down again. You can do it with your fingers or with any other instrument that won’t puncture the bubble. Do the same thing for any other bubbles that will appear. As long as you are careful, do not press hard, as it may cause the sticker to tear or stretch.
Step 5: Use a Flat Tool to Smooth the Sticker
If you want to get the best of it, you can also use a flat tool such as a credit card or a small plastic scraper to make them even flatter. Many of these are useful to help apply the sticker on the surface to ensure that it is smooth, with no bubbles or creases. Begin in the middle and work your way outwards, always using the tool to guide the air towards the border.
A plastic card is the most effective because of its flat surface, which facilitates pressing the sticker down. However, remember that you must avoid scratching the surface or harming the holographic design when applying the sticker.
Should you have a little bit of trapped air, using the card’s border to burst any lying air bubbles forward and central by merely applying pressure from the midpoint carrying to the perimeter is acceptable.
Step 6: Let the Sticker Set and Dry
When you’ve finally stuck your holographic sticker and floated the material over your object, you need to let it sit a bit. This means you should avoid touching or moving it for at least a few hours. Letting it set will help the mask dry properly without the urge to peel off or pull the skin in areas that have formed new wrinkles.
If the sticker is applied to an object that tends to come in contact with moisture (for example, a water bottle or a phone case), it’s better to wait at least twenty-four hours before it starts to get used. This allows the adhesive sufficient time to make a proper bond with the surface and guards it against such things as peeling.
Step 7: Take Care of Your Sticker
However, proper care should be observed to ensure that your holographic sticker remains as lovely as it was when it was applied. Here are a few tips:
Avoid peeling: Do not attempt to remove the sticker once it has been attached. Peeling results in tearing or stretching the stickers, leaving behind a sticky residue.
Don’t expose it to water immediately: If you stick a message, for example, onto the water bottle, it would be wise not to dip it into water for at least a day. This helps to allow the adhesive ample time to set on the surfaces to which it was applied.
Keep away from heat: As for the care of holographic stickers, they do not like sunlight and should not be left in the car for a long time or on a hot plate. Water and then heat will make the sticker fade or even peel off.
Clean gently: If you need to wash the surface with the sticker, do it as lightly as possible. Use a soft cloth and avoid vigorous scrubbing. Do not treat it with strong detergents, as they will destroy the hologram look.
Why Vograce Holographic Stickers Are the Best?
Now that you know how to apply your holographic stickers properly, no more bubbles or wrinkles, it’s time to find the perfect sticker for the project. If you need fine, detailed holographic stickers that are readily customizable, Vograce will serve you best.
Vograce has many holographic stickers that can be customized according to your preference for its appearance or your company’s logo. If you use stickers to design your school supplies, create individual gift items, or as a brand for your products, Vograce stickers would best suit you because of their outstanding appearance and durability.
Not only that but for the people who have decided to buy at Vograce, there will be an awesome opportunity to become a discount holder! So why wait? Visit Vograce now to see all the great choices and incorporate more bright and shiny holographic stickers into your life.
Conclusion: Bring Home Perfect Stickers Every Time
If you learn how to apply holographic stickers, bubbles or wrinkles will not affect your design. The surface should be clean. Remove the sticker gently and stick it carefully and slowly on the object. Bust out air bubbles using a flat tool, and allow the sticker to dry before using your item. By following all these tips, anyone should be able to get that neatly applied sticker all the time!
Go to Vograce for superior holographic stickers with the design of your dreams. There are many designs to choose from, so you can choose stickers that fit your personality well. Please do not miss this fantastic offer, and begin turning your world into art with Vograce holographic stickers now!
